<kbd id='tuxztm'></kbd><address id='hwvuex'><style id='slrtla'></style></address><button id='liyfnd'></button>

          当前位置:济南汉派瑞 >> 公司动态 >> 行业资讯 >> 浏览文章行业资讯

          关于气动增压泵资料
          作者:气动增压泵 | 关键词:气动增压泵 | 添加日期:2017年12月13日 | 浏览次数:

          气动增压泵参考资料
          气动增压泵的主要特点:输出压力高、使用范围广、输出流量范围广、应用灵活、易于调节、自动保压、 操作安全、维护简单、性价比高、气动泵出厂前已加注润滑剂,工作时无需外部润滑。
          Pneumatic booster pump main features: output high pressure, wide range of use, wide range of output flow, flexible application, easy adjustment, automatic pressure maintaining, safety operation, simple maintenance and high cost performance, pneumatic pump before delivery has been filling lubricant, work without external lubrication.
          气动增压泵利用大面积活塞端的低压气体驱动而产生小面积活塞端的注册送体验金网站大全流体?捎糜谘顾蹩掌捌渌,输出气压可通过驱动气压无级调节。
          The compressed-air pressure pump USES a low-pressure gas drive on a large area of piston to produce a high pressure fluid on the piston side.It can be used to compress air and other gases. The output pressure can be adjusted by driving pressure.
          气动增压泵技术参数:
          动力源:压缩空气
          驱动气工作压力:0.3-0.8MPa
          输出压力:气体最高160MPa,液体500MPa 不同型号输出压力不同
          Technical parameters of pneumatic booster pump:
          Power source: compressed air
          Driving pressure: 0.3-0.8MPa
          Output pressure: gas maximum 160MPa, liquid 500MPa different output pressure different
          气动增压泵工作原理。
          材质优良:注册送体验金网站大全部分材质为不锈钢。注册送体验金网站大全柱塞材质为不锈钢,并采用双层密封。
          自动保压:工作时,迅速往复工作,随着输出压力接近设定压力值时泵的往复运动速度减慢直至停止。并保持这个压力,此时消耗能量很小,无热量产生,无零件运动。当压力平衡打破后,气动增压泵自动开始工作到下一个平衡。
           1、气体增压泵维护简单:气动增压泵的零件及密封少,维护简单且成本低。相同系列泵的所有"O"型圈,维修包易损部件可相互替换,大大降低了维修成本。
          2、气动增压泵出厂前已加注润滑剂,工作时无需外部润滑。 保持液压无须消耗能量、 具有防爆功能,无需电力或电线连接
          3、自身安全
          4、结构小巧,重量轻,不受天气变化影响
          5、易实现自动控制 6、 抗污染
          7、输出静态压力由驱动气压来调节 8、 输出压力达80000PSI的压力
          9、在满负载时非常容易进行启动、停止操作
          10、易安装操作
          Operating principle of pneumatic booster pump.
          Excellent material: the high pressure part is stainless steel.The high pressure plunger is made of stainless steel and double sealed.
          Automatic voltage protection: when the work is done, the reciprocating motion of the pump will slow down until the output pressure is near the set pressure value.And to keep that pressure up, the energy consumption is very small, there's no heat generation, no part movement.When the pressure balance is broken, the pneumatic booster pump automatically begins to work to the next equilibrium.
          1. The maintenance of the gas booster pump is simple: the parts and seals of the pneumatic booster pump are less, the maintenance is simple and the cost is low.All "O" loops of the same series of pumps can be replaced with each other, which greatly reduces the maintenance cost.
          2. The pneumatic booster pump has been filled with lubricant before leaving the factory. No external lubrication is needed at work.Keep the hydraulic pressure free of energy and explosion-proof function without electricity or wire connection
          3. Own safety
          4. Small structure and light weight, not affected by the change of weather
          5. Easy to realize automatic control 6, anti-pollution
          7. The static pressure of the output pressure is adjusted by the driving pressure and the output pressure reaches 80000PSI
          9. It is very easy to start and stop operation when full load
          10. Easy to install operation

          版权所有 Copyright 2013 注册送体验金网站大全 济南市历城区工业南路6-9号
          电话:0531-88621016 邮箱:hipressure@163.com 鲁ICP备11001027号 技术支持:济南网站建设

          点击这里给我发消息